Laminar Scots pine wood with autoclave impregnation in class RAL 3 according to the
DIN 68800/3 standards. Wood painted with water-impregnated varnishes. Painted Aisi 304 stainless steel brackets and supports. Stainless steel bolts and screws.
Double-beam load-bearing structure, 150 or 200 x 60 mm, leaning on front 90 x 160 mm beam supported by posts. Fabric pitch awning supported by 43 x 65 mm windbreak support bar profile and by 85 x 65 mm load-bearing end, and slides on 46 x 85 mm lateral guides. Windbreak support bar, end and guides are made of painted aluminum. Transmission system on lateral guides with high-resistance timing belt, rotating on ball bearings. Manual or automated movement system.

Optional: front gutter with external downspout. post that drains water through the foot of the post to the ground. .

For projections greater than 600 cm, support beam (section 9 x 6 cm) positioned at about half the projection.

Possibility to customize beam ends.


(L) Width from 250 to 550 cm (1 module)
up to 900 cm (2 modules)
up to 1200 cm (3 modules)
(S) Projection from 200 to 700 cm
(H) Height 230 cm under the beam

2 Modules

3 Modules

In Production

Anthracite VIV 416

White RAL 9010

Ivory RAL 1013

VR light steel

Brown RAL 8017

Upon request

Other RAL®

Spread the love